The correct use of the sticky balance block:

1. Select the appropriate cleanser (e.g. 70% isopropanol solution) and carefully clean the surface of the wheel with a clean soft cloth to remove impurities and dust on the surface of the hub.
Note:
should ensure that the ambient temperature balance block, and the temperature of the wheel hubnot below 16 ℃.

After cleaning the hub, place the balance piece on the hub, check that the arc of the hub is suitable for the balance piece, and when the balance block is placed, it retains the protective covering of the back tape. The radius of the balance should be at least parallel to the radius of the hub.

Remove the protective film on the back of the balance piece and place the balance piece on the hub. When placing the balance piece, the force should be applied at the end of the balance blockwith the pressure of 100 kpa.

After the balance piece is pasted, press on both ends from the middle of the balance block. The adhesive force of the balance piece is 80 to 90% after about 24 hours, and after 72 hours, the adhesive force reaches 100%.